These are Genesis’ entry-level road bikes and are the cheapest in their range. The geometry is a little more upright, making… If there are any issues with your bike, return it for a full refund or receive a replacement bike for free. Your bike frame & fork are protected under our Lifetime Warranty policy. We do not have a spring rate chart or recommendation for this model.
Some riders incorrectly assume that a lightweight wheel with a low spoke count is difficult to keep in true. Yet a poorly assembled wheel with uneven spoke tension is far more likely to have issues. That’s why the majority of new owners reported that their Genesis V2100 was delivered with bent wheels, right out of the box.
However, the Spur was not designed with any reservoir equipped shocks in mind, and clearance for the reservoir was not a factor in the frame design. Transition Bikes is not responsible for any damage to a frame caused by a shock that we do not spec. Always check bottom out clearances before riding a non-spec shock and to verify fitment email us at You’re a fool for thinking Walmart bikes are decent bikes. Sure they are cheap, heavy, made with really crappy components, and can get you from a to b.
But, being assembled improperly is half the battle when buying a “Big Box Brand” bike. That if you are not an avid cyclist with basic bike skills can cost you as much as the bike to get repaired. So why even bother if you want a bike that you can ride and will last more genesis mountain bike than a few rides before having catastrophic failure. If you find yourself in Bellingham, you can follow this link to schedule a demo through the Outpost. If you live somewhere else, you can follow this link to see what shops currently have demo bikes available.
The project provides work experience to adults with learning disabilities, teaching bicycles repairs. I’m not sure any bike in this class can say that. When it comes down to it, only two things really matter. The answer with this bike is yes, and yes, and all at an affordable cost. I had one of these bikes a few years back. There was just a couple things that was loose… But after getting a allen wrench, I was able to tighten up everything.
Of course, any weight savings from the bar swap would be offset when it comes time to replace the pedals (after about two rides or less), as they seem to have earned a reputation as the cheapest pedals genesis mountain bike ever. We did note that in online reviews, the average owner spent an additional $80 or more to get their bike in working order. Incorrectly installed tubes lasted only until they were inflated.
Please reach out to the shock manufacturer or use the spring rate calculator here. However, we do accept Paypal and you can apply for financing through them. Transition Bikes encourages you to use financing responsibly. We want you to get a new ride as much as you do, but we also want you to eat and live well. We want you to love your purchase, but if an item fails to meet your expectations we will accept its return.
This may have been done on purpose, to match the out of true Promax disc brake rotor. Speaking of which, be prepared to spend time messing with the drivetrain. Although it’s from Shimano, the 3×7 shifters and derailleurs have more than enough slop that your LBS may simply refuse to work on it, knowing they will never be able to get it to shift smoothly and consistently. With a slogan like “Excellence Begins Here”, there was no way we could pass up the chance to review the Genesis V2100 mountain bike. This $149 full suspension, 26″ bike has it all – aluminum frame, at least one disc brake, Shimano drivetrain, and even a padded seat. As an added bonus, it includes a full set of front, rear, pedal, and wheel reflectors, so you can be in compliance with local vehicle codes.